Specifications:

• Image Sensor: 1/3" Sharp CCD
• TV system: NTSC, PAL
• Horizontal Resolution: 420TVL
• Lens: 2.8mm lens
• Sync. System: Internal
• Video Out: 1Vp-p,75ohm,BNC
• Image Size: PAL:512(H)×582(V)    NTSC:510(H)x492(V)
• Minimum Illumination: 0Lux(IR Leds On)
• S/N Ratio: More than 48dB
• Shutter Speed: Auto:1/50(1/60)-1/100,000(Sec.)
• White Balance: Auto tracking white balance
• Current Consumption: 120mA
• Power Sourcing: DC12V
• Lens Mount: C/CS mount
• Scanning Frequency: 50HZ
• Auto Iris Lens: DC/VIDEO selectable
• Operating Temperature: 10℃ ~ +50℃
• Weatherproof
• Mirror function
• 18 IR leds

Details:

• 1/3inch SHARP CCD Color Car Rear View Camera

How to Clean a CCD Camera:

• Plug the camera in. If the batteries were to die while you're cleaning, the camera will automatically close on your cleaning tools and will need expensive repairs
• Read your camera's manual to find out how to lock the mirror and hold open the shutter. It may be a custom function on your camera, and your manual will describe how to do this. Each camera is slightly different
• Use an air blower to blow air onto the mirror to clean off larger particles of dust. Do not stick the air blower inside the camera. If the camera closes, or the mirror moves, it will scratch it. A foot-powered air pump works well
• Use a sensor brush to clean the camera's sensor. Only use a sensor brush if this is not the first time the camera has been cleaned. Move the brush gently from left to right, take it out and spray it off with the air brush, then stroke the sensor again. Repeat this until the sensor appears clean

Package Included:

• 1 x 1/3" SHARP CCD Color Car Rear View Camera 420 TVL with 2.8mm Lens CAM-611CR1